Voltage setting

Overview

All Lavry products can operate on AC power input voltages in the range of 115 or 230 volts and 50 or 60 Hz. Some products require the operating voltage to be set manually before AC power is applied, and other Lavry products automatically adjust with no setting change required. Please consult the product’s manual for details.

All Lavry products are shipped with USA standard 115 volt AC power cables which have standard IEC connectors on the end that plugs into the unit. When operating a Lavry product in other locations, please use an AC power cord with the appropriate plug and voltage rating. Lavry products should always be operated with the AC power grounded properly.

Products

The following products require manual AC voltage setting. None of these products are currently in production.

• LavryGold DA924
• LavryGold DA2002
• LavryGold AD122-96 MkII
• LavryGold 3000

For a procedure to set the voltage, please see LavryGold voltage setting. This procedure also covers accessing the fuses.

The following products automatically adjust to AC power inputs in the rated range of 90-264 VAC @47-63Hz. There are no settings to change. They are configured to operate properly for AC power inputs in the rated range with the AC power input module voltage selector in either the "115" or "230" volt position.

• LavryGold AD122-96 MkIII
• LavryGold AD122-96 MX
• LavryGold Quintessence DA-N5
• Synchrony-16 Master Clock

For the procedure to access the fuses, please LavryGold voltage setting.

The following products automatically adjust to AC power inputs in the rated range of 90-264 VAC @47-63Hz. There are no settings to change.

• LavryGold LE3000s
• LavryBlue 4496 (all models)
• LavryBlack AD10
• LavryBlack AD11
• LavryBlack DA10
• LavryBlack DA11
• LavryBlack MP10
• LK-1
• LK-Solo