Difference between revisions of "BNC"
Brad Johnson (talk | contribs) (→Basics) |
Brad Johnson (talk | contribs) (→Basics) |
||
| Line 2: | Line 2: | ||
The term "<nowiki>BNC</nowiki>" is used to describe a "locking" coaxial [[impedance]]-matched connector used for very high frequency analog signals as well as some digital audio signals. These include [[Word Clock]] and [[S-PDIF]] signals. | The term "<nowiki>BNC</nowiki>" is used to describe a "locking" coaxial [[impedance]]-matched connector used for very high frequency analog signals as well as some digital audio signals. These include [[Word Clock]] and [[S-PDIF]] signals. | ||
==Basics== | ==Basics== | ||
| − | In order to maintain signal quality, when very high frequencies are transmitted from one device to another; the impedance of the connectors must match the characteristic impedance of the cable as well as the output and input impedance of the transmitting and receiving circuitry. This is due to the tendency for some of the signal's energy to "reflect" at an impedance miss-match in a manner analogous to the way light reflects of a partially mirrored surface (or even a clean piece of glass). The reflected energy then combines with the signal energy at the receiver and distorts the signal [[ | + | In order to maintain signal quality, when very high frequencies are transmitted from one device to another; the impedance of the connectors must match the characteristic impedance of the cable as well as the output and input impedance of the transmitting and receiving circuitry. This is due to the tendency for some of the signal's energy to "reflect" at an impedance miss-match in a manner analogous to the way light reflects of a partially mirrored surface (or even a clean piece of glass). The reflected energy then combines with the signal energy at the receiver and distorts the signal [[waveform]]. |
| + | |||
| + | BNC connectors are impedance matched to 50 or 75 Ohm cable to minimize this source of degradation. They also offer the advantage of "locking" in place to eliminate the possibility of accidental disconnection. The term "BNC" stands for "Bayonet Nut Connector" and the locking mechanism is similar to that of a bayonet mount on the barrel of a gun. | ||
| + | |||
[http://en.wikipedia.org/wiki/BNC_connector Click here for more detailed information] | [http://en.wikipedia.org/wiki/BNC_connector Click here for more detailed information] | ||
Revision as of 16:25, 5 July 2012
Overview
The term "BNC" is used to describe a "locking" coaxial impedance-matched connector used for very high frequency analog signals as well as some digital audio signals. These include Word Clock and S-PDIF signals.
Basics
In order to maintain signal quality, when very high frequencies are transmitted from one device to another; the impedance of the connectors must match the characteristic impedance of the cable as well as the output and input impedance of the transmitting and receiving circuitry. This is due to the tendency for some of the signal's energy to "reflect" at an impedance miss-match in a manner analogous to the way light reflects of a partially mirrored surface (or even a clean piece of glass). The reflected energy then combines with the signal energy at the receiver and distorts the signal waveform.
BNC connectors are impedance matched to 50 or 75 Ohm cable to minimize this source of degradation. They also offer the advantage of "locking" in place to eliminate the possibility of accidental disconnection. The term "BNC" stands for "Bayonet Nut Connector" and the locking mechanism is similar to that of a bayonet mount on the barrel of a gun.