Difference between revisions of "Unbalanced"
Brad Johnson (talk | contribs) |
Brad Johnson (talk | contribs) |
||
| Line 10: | Line 10: | ||
#Induced noise | #Induced noise | ||
#Ground "loops" | #Ground "loops" | ||
| − | |||
[[Category:Terminology]] | [[Category:Terminology]] | ||
[[Category:Analog interconnects]] | [[Category:Analog interconnects]] | ||
[[Category:Digital interconnects]] | [[Category:Digital interconnects]] | ||
Revision as of 12:22, 7 March 2012
Overview
The term "Unbalanced" is used to describe connections that are not "balanced" and employ a conductor held at "signal ground" potential to act as a "signal return."
Basics
Any circuit must have a "path" for the current flowing in it to both "go to" the receiving device (or "load") and "return from" it. In the case of an unbalanced connection; even though the return conductor may be held at ground potential by being connected to the signal ground; it still can act as a return path for the signal current.
By definition; this means that the signal ground of both the sending and receiving device must be connected together via the unbalanced connection; and this can lead to issues caused by other "interference" currents also flowing on this path. This is why balanced connections are used in audio as a means of eliminating this source of interference.
Two sources of interference are:
- Induced noise
- Ground "loops"