Difference between revisions of "Polarity"
Brad Johnson (talk | contribs) (Created page with "==Overview== The term "<nowiki>Polarity</nowiki>"as applied to audio is used to describe the relationship of the electrical audio waveform to the original acoustic waveform. The ...") |
Brad Johnson (talk | contribs) |
||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | The term "<nowiki>Polarity</nowiki>"as applied to audio is used to describe the relationship of the electrical audio waveform to the original acoustic waveform. The audio waveform is considered to have "correct polarity" if the positive voltage section of the waveform corresponds to the positive air pressure section of the acoustic waveform. It is possible for the polarity of the waveform to be inverted" by audio circuitry or connections. | + | The term "<nowiki>Polarity</nowiki>" as applied to audio is used to describe the relationship of the electrical audio waveform to the original acoustic waveform. The audio waveform is considered to have "correct polarity" if the positive voltage section of the waveform corresponds to the positive air pressure section of the acoustic waveform. It is possible for the polarity of the waveform to be "inverted" by audio circuitry or connections. The audibility of polarity inversion can vary greatly with program material and the listening environment. |
==History== | ==History== | ||
| + | In the early days of audio, it was widely held that signal polarity was "not important" because inverting the polarity had no obvious audible effect. As audio technology progressed, advances such as the elimination of transformers and the development of "DC" audio circuitry made the effects of incorrect signal polarity more apparent. As a result; correct signal polarity is more likely to be maintained throughout the recording process. | ||
| + | ==Basics== | ||
| + | The effect of incorrect signal polarity is that a speaker cone will move away from the listener when the original acoustic wave had a positive pressure and towards the listener when the acoustic pressure was negative. | ||
| − | |||
[Category:Terminology] | [Category:Terminology] | ||
Revision as of 17:22, 5 March 2012
Overview
The term "Polarity" as applied to audio is used to describe the relationship of the electrical audio waveform to the original acoustic waveform. The audio waveform is considered to have "correct polarity" if the positive voltage section of the waveform corresponds to the positive air pressure section of the acoustic waveform. It is possible for the polarity of the waveform to be "inverted" by audio circuitry or connections. The audibility of polarity inversion can vary greatly with program material and the listening environment.
History
In the early days of audio, it was widely held that signal polarity was "not important" because inverting the polarity had no obvious audible effect. As audio technology progressed, advances such as the elimination of transformers and the development of "DC" audio circuitry made the effects of incorrect signal polarity more apparent. As a result; correct signal polarity is more likely to be maintained throughout the recording process.
Basics
The effect of incorrect signal polarity is that a speaker cone will move away from the listener when the original acoustic wave had a positive pressure and towards the listener when the acoustic pressure was negative.
[Category:Terminology]