Difference between revisions of "T.S."
Brad Johnson (talk | contribs) |
Brad Johnson (talk | contribs) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | The term "<nowiki>T.S.</nowiki>" is used to describe a two-conductor 1/4" "phone" plug similar to a guitar cable plug. | + | The term "<nowiki>T.S.</nowiki>" is used to describe a two-conductor [[1/4"]] "phone" plug similar to a guitar cable plug. |
==History== | ==History== | ||
The <nowiki>T.S.</nowiki> connector is similar to the T.R.S. connector originally developed for use in telephone switchboards except that it has only two conductors. It is widely used in audio applications for making [[unbalanced]] audio connections. | The <nowiki>T.S.</nowiki> connector is similar to the T.R.S. connector originally developed for use in telephone switchboards except that it has only two conductors. It is widely used in audio applications for making [[unbalanced]] audio connections. | ||
| Line 8: | Line 8: | ||
#The "sleeve" which is the longest conductor furthest from the tip. | #The "sleeve" which is the longest conductor furthest from the tip. | ||
| − | + | ===Typical Wiring Connections=== | |
*The tip is connected to the signal conductor. | *The tip is connected to the signal conductor. | ||
*The sleeve is connected to the Shield/signal return. | *The sleeve is connected to the Shield/signal return. | ||
| Line 15: | Line 15: | ||
In cases where hum or noise pick-up is a problem; it is also possible to use a T.S. connector with [[shielded twisted-pair]] cable typically used for balanced connections with a "[[quasi-balanced]]" connection scheme. | In cases where hum or noise pick-up is a problem; it is also possible to use a T.S. connector with [[shielded twisted-pair]] cable typically used for balanced connections with a "[[quasi-balanced]]" connection scheme. | ||
| + | |||
| + | ==Related== | ||
| + | [[T.R.S.]], [[1/4"]] | ||
[[Category:Terminology]] | [[Category:Terminology]] | ||
[[Category:Connections]] | [[Category:Connections]] | ||
Latest revision as of 16:09, 12 March 2013
Overview
The term "T.S." is used to describe a two-conductor 1/4" "phone" plug similar to a guitar cable plug.
History
The T.S. connector is similar to the T.R.S. connector originally developed for use in telephone switchboards except that it has only two conductors. It is widely used in audio applications for making unbalanced audio connections.
Basics
The T.R.S. connector is a 1/4" diameter "phone" plug that has two conductors:
- The "tip" which is the conductor at the tip of the plug
- The "sleeve" which is the longest conductor furthest from the tip.
Typical Wiring Connections
- The tip is connected to the signal conductor.
- The sleeve is connected to the Shield/signal return.
In the vast majority of cases, a coaxial cable is used for cables with T.S. connectors on one or both ends. This means that the shield acts as both the shield conductor and the signal return conductor.
In cases where hum or noise pick-up is a problem; it is also possible to use a T.S. connector with shielded twisted-pair cable typically used for balanced connections with a "quasi-balanced" connection scheme.