Difference between revisions of "T.R.S."
Jump to navigation
Jump to search
Brad Johnson (talk | contribs) |
Brad Johnson (talk | contribs) |
||
| (2 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
==Overview== | ==Overview== | ||
| − | The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug. | + | The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor [[1/4"]] "phone" plug similar to a headphone plug. |
==History== | ==History== | ||
The <nowiki>T.R.S.</nowiki> connector was originally developed for use in telephone switchboards. It is widely used in audio applications for making [[balanced]] audio connections. | The <nowiki>T.R.S.</nowiki> connector was originally developed for use in telephone switchboards. It is widely used in audio applications for making [[balanced]] audio connections. | ||
| Line 8: | Line 8: | ||
#The "ring" which is the middle conductor. | #The "ring" which is the middle conductor. | ||
#The "sleeve" which is the longest conductor furthest from the tip. | #The "sleeve" which is the longest conductor furthest from the tip. | ||
| − | + | ===Typical Wiring Connections=== | |
| − | |||
| − | |||
*The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal. | *The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal. | ||
*The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal. | *The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal. | ||
| − | *The sleeve is connected to the Shield | + | *The sleeve is connected to the [[Shield]]. |
In the vast majority of cases, a [[shielded twisted-pair]] cable is used for cables with T.R.S. connectors on one or both ends. | In the vast majority of cases, a [[shielded twisted-pair]] cable is used for cables with T.R.S. connectors on one or both ends. | ||
| + | ==Related== | ||
| + | [[T.S.]], [[1/4"]] | ||
[[Category:Terminology]] | [[Category:Terminology]] | ||
[[Category:Connections]] | [[Category:Connections]] | ||
Latest revision as of 16:08, 12 March 2013
Overview
The term "T.R.S." is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug.
History
The T.R.S. connector was originally developed for use in telephone switchboards. It is widely used in audio applications for making balanced audio connections.
Basics
The T.R.S. connector is a 1/4" diameter "phone" plug that has three conductors:
- The "tip" which is the conductor at the tip of the plug.
- The "ring" which is the middle conductor.
- The "sleeve" which is the longest conductor furthest from the tip.
Typical Wiring Connections
- The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal.
- The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal.
- The sleeve is connected to the Shield.
In the vast majority of cases, a shielded twisted-pair cable is used for cables with T.R.S. connectors on one or both ends.