Difference between revisions of "T.R.S."
Jump to navigation
Jump to search
Brad Johnson (talk | contribs) |
Brad Johnson (talk | contribs) |
||
| Line 5: | Line 5: | ||
==Basics== | ==Basics== | ||
The <nowiki>T.R.S.</nowiki> connector is a 1/4" diameter "phone" plug that has three conductors: | The <nowiki>T.R.S.</nowiki> connector is a 1/4" diameter "phone" plug that has three conductors: | ||
| − | #The "tip" which is the conductor at the tip of the plug | + | #The "tip" which is the conductor at the tip of the plug. |
| − | #The "ring" which is the middle conductor | + | #The "ring" which is the middle conductor. |
#The "sleeve" which is the longest conductor furthest from the tip. | #The "sleeve" which is the longest conductor furthest from the tip. | ||
This type of connector is typically wired as follows: | This type of connector is typically wired as follows: | ||
| − | *The tip is connected to the "high" signal conductor, which may also be designated the "+" conductor as it will carry the non-inverted signal | + | *The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal. |
| − | + | *The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal. | |
*The sleeve is connected to the Shield/signal return. | *The sleeve is connected to the Shield/signal return. | ||
Revision as of 14:53, 15 March 2012
Overview
The term "T.R.S." is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug.
History
The T.R.S. connector was originally developed for use in telephone switchboards. It is widely used in audio applications for making balanced audio connections.
Basics
The T.R.S. connector is a 1/4" diameter "phone" plug that has three conductors:
- The "tip" which is the conductor at the tip of the plug.
- The "ring" which is the middle conductor.
- The "sleeve" which is the longest conductor furthest from the tip.
This type of connector is typically wired as follows:
- The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal.
- The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal.
- The sleeve is connected to the Shield/signal return.
In the vast majority of cases, a shielded twisted-pair cable is used for cables with T.R.S. connectors on one or both ends.