T.R.S. - Revision history

Brad Johnson at 23:08, 12 March 2013

2013-03-12T23:08:48Z

Brad Johnson at 22:37, 12 March 2013

2013-03-12T22:37:50Z

Brad Johnson at 23:01, 7 December 2012

2012-12-07T23:01:45Z

Brad Johnson at 21:53, 15 March 2012

2012-03-15T21:53:23Z

Brad Johnson at 18:27, 15 March 2012

2012-03-15T18:27:00Z

Brad Johnson at 00:06, 15 March 2012

2012-03-15T00:06:54Z

Brad Johnson at 00:05, 15 March 2012

2012-03-15T00:05:52Z

Brad Johnson: Created page with "==Overview== The term "T.R.S." is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug."

2012-03-15T00:01:42Z

Created page with "==Overview== The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug."

New page

==Overview==
The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug.

@@ Line 1: / Line 1: @@
 ==Overview==
-The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug.
+The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor [[1/4"]] "phone" plug similar to a headphone plug.
 ==History==
 The <nowiki>T.R.S.</nowiki> connector was originally developed for use in telephone switchboards. It is widely used in audio applications for making [[balanced]] audio connections.

@@ Line 8: / Line 8: @@
 #The "ring" which is the middle conductor.
 #The "sleeve" which is the longest conductor furthest from the tip.
+===Typical Wiring Connections===
 *The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal.
 *The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal.
@@ Line 17: / Line 15: @@
 In the vast majority of cases, a [[shielded twisted-pair]] cable is used for cables with T.R.S. connectors on one or both ends.
 [[Category:Terminology]]
 [[Category:Connections]]

@@ Line 13: / Line 13: @@
 *The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal.
 *The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal.
-*The sleeve is connected to the Shield/signal return.
+*The sleeve is connected to the [[Shield]].
 In the vast majority of cases, a [[shielded twisted-pair]] cable is used for cables with T.R.S. connectors on one or both ends.

@@ Line 5: / Line 5: @@
 ==Basics==
 The <nowiki>T.R.S.</nowiki> connector is a 1/4" diameter "phone" plug that has three conductors:
-#The "tip" which is the conductor at the tip of the plug
+#The "tip" which is the conductor at the tip of the plug.
-#The "ring" which is the middle conductor
+#The "ring" which is the middle conductor.
 #The "sleeve" which is the longest conductor furthest from the tip.
 This type of connector is typically wired as follows:
-*The tip is connected to the "high" signal conductor, which may also be designated the "+" conductor as it will carry the non-inverted signal of a balanced pair.
+*The tip is connected to the "high" signal conductor of the twisted pair, which may also be designated the "+" conductor as it will carry the non-inverted signal.
-The ring is connected to the "low" signal conductor, which may also be designated the "-" conductor as it will carry the inverted signal of a balanced pair.
+*The ring is connected to the "low" signal conductor of the twisted pair, which may also be designated the "-" conductor as it will carry the inverted signal.
 *The sleeve is connected to the Shield/signal return.

@@ Line 8: / Line 8: @@
 #The "ring" which is the middle conductor
 #The "sleeve" which is the longest conductor furthest from the tip.
 [[Category:Terminology]]
 [[Category:Connections]]

← Older revision		Revision as of 00:06, 15 March 2012
Line 8:		Line 8:
	#The "ring" which is the middle conductor		#The "ring" which is the middle conductor
	#The "sleeve" which is the longest conductor furthest from the tip.		#The "sleeve" which is the longest conductor furthest from the tip.
		+
		+	[[Category:Terminology]]
		+	[[Category:Connections]]

← Older revision		Revision as of 00:05, 15 March 2012
Line 1:		Line 1:
	==Overview==		==Overview==
	The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug.		The term "<nowiki>T.R.S.</nowiki>" is used to describe a three-conductor 1/4" "phone" plug similar to a headphone plug.
		+	==History==
		+	The <nowiki>T.R.S.</nowiki> connector was originally developed for use in telephone switchboards. It is widely used in audio applications for making [[balanced]] audio connections.
		+	==Basics==
		+	The <nowiki>T.R.S.</nowiki> connector is a 1/4" diameter "phone" plug that has three conductors:
		+	#The "tip" which is the conductor at the tip of the plug
		+	#The "ring" which is the middle conductor
		+	#The "sleeve" which is the longest conductor furthest from the tip.