BNC "T" - Revision history

Brad Johnson at 18:31, 4 August 2017

2017-08-04T18:31:37Z

Brad Johnson at 18:30, 4 August 2017

2017-08-04T18:30:01Z

Brad Johnson: Created page with "==Overview== The term "BNC “T”" is used to describe a special BNC adapter with three connectors which is typically use to “split” or “mult” a BNC..."

2017-08-04T18:12:58Z

Created page with "==Overview== The term "<nowiki>BNC “T”</nowiki>" is used to describe a special BNC adapter with three connectors which is typically use to “split” or “mult” a BNC..."

New page

==Overview==
The term "<nowiki>BNC “T”</nowiki>" is used to describe a special [[BNC]] adapter with three connectors which is typically use to “split” or “mult” a BNC connection.

==Basics==
The BNC T is required to connect a [[BNC Terminator]] to the end of a cable that connects to a BNC input. By providing the necessary extra connection, the cable can be connected to both the input it is feeding and the terminator.
Like all BNC connectors, the BNC T has characteristic impedance that matches the cable and terminator. For connections use in [[digital audio]] this impedance is 75 Ohms.
The other common impedance for BNC connectors is 50 Ohms. For best performance, it is important that the BNC T be of 75 Ohm impedance.
Please see [[termination]] more information.

==Example==
[[File: BNC T.png|left]]

[[Category:Terminology]]
[[Category:Audio conversion]]

@@ Line 1: / Line 1: @@
 ==Overview==
-The term "<nowiki>BNC “T”</nowiki> is used to describe a special [[BNC]] adapter with three connectors which is typically use to “split” or “mult” a BNC connection.
+The term <nowiki>BNC “T”</nowiki> is used to describe a special [[BNC]] adapter with three connectors which is typically use to “split” or “mult” a BNC connection.
 ==Basics==