Search results

...-in [[headphone amplifier]] and front panel 1/4" headphone jack. A stepped analog Volume control adjusts both the main line output and the headphone output l *Ultra low jitter mode to minimize source degradation

The term <nowiki>"saturation"</nowiki> is used to describe a "limiting" effect where little or no increase in output level re There are two forms of saturation in Lavry converters: analog and digital.

The term "<nowiki>USB</nowiki>" is used to describe a form of general purpose serial computer interface standard; the [[Digital interconnect]]

...ession]] of both the [[lossless]] and [[lossy]] variety. Analog to digital converters can also be used for non-audio applications; but that is beyond the scope o ...try to accept [[line level]] analog input signals and output the encoded [[digital audio]] signal in one or more formats.

...pe saturation. However, it is not an attempt to emulate a specific type of analog tape. The main application is for peak level control to allow higher average levels; or "hotter levels." Average level is more impo

...onverter units). A digital to analog converter must be used to listen to a digital audio signal. ...[[digital audio]] signal in one or more formats and output [[line level]] analog audio signals.

...applied to audio refers to a specific volume level where a process begins to take effect. In some cases the threshold is variable by the user and in oth ...anding how [[jitter]] can result from variations in the [[waveform]] input to clock recovery circuitry.

...uilt-in headphone amplifier and front panel 1/4" headphone jack. A stepped analog Volume control adjusts both the main line output and the headphone output l For general information see [[digital to analog converter]].

...gh a digital audio device or system and exit that system in the form of an analog audio signal. ...istent. For this reason, most people would consider analog audio circuitry to have [[zero latency]].

...[[optical]] formats. An XLR to RCA [[adapter]] is included for connection to [[RCA]]/[[S-PDIF]] inputs. For general information see [[analog to digital converter]].

...e are two [[AES]]/XLR and one [[SPDIF]] RCA (IEC) input that accept stereo digital audio inputs. For general information see [[digital to analog converter]].

...ages are completely separate and relay bypassed; so there is no compromise to the performance in either mode. For general information see [[analog to digital converter]].

[[Image: Lavry-da2002-0.png]] ...e are two [[AES]]/XLR and one [[SPDIF]] RCA (IEC) input that accept stereo digital audio inputs.

...f conversion. The MSYNC module provides clock and external synchronization to all AD modules in a chassis, as well as a [[BNC]] Word Clock output. For general information see [[digital to analog converter]], [[analog to digital converter]], [[microphone preamplifier]].

...l is accomplished in the analog domain by proprietary digitally controlled analog circuitry. ...the input is selected. This allows the listening level to be equalized for digital sources with different levels. The Volume can be adjusted over an 80 [[dB]]

...e logarithmic dB scale approximates the relationship of the measured value to the perceived change in acoustic level. ...llowing discussion a value such as "two squared" is described as "2 raised to the power of 2" for clarity.''

...ations; with balanced professional level [[XLR]] inputs and an XLR/[[AES]] digital output. There is a [[BNC]] [[Word Clock]] input and output, as well as an X ...increased ability to handle clipping without audible degradation compared to the LavryGold AD122-96 MkIII.

...ns; with [[balanced]] professional level [[XLR]] inputs and an XLR/[[AES]] digital output. There is a [[BNC]] [[Word Clock]] input and output, as well as an X ...increased ability to handle clipping without audible degradation compared to the [[LavryGold AD122-96 MkIII]].

The term "<nowiki>Balanced</nowiki>" is used in audio to describe a form of signal transmission utilizing two signal conductors that In order to minimize noise pick-up by long cables carrying low level signal such as tho